DataLink 100e Category 5e F/UTP 100 Ohm Outdoor LAN Cables
Description
HCS DataLink 100e outdoor cable series consists of 100 Ohm impedance, 4-pair and 8-pair F/UTP cables double-jacketed with LS0H compound + heavy-duty, black, UV-resistant PVC compound for outdoor horizontal installations in local area networks (LANs). All cables fully conform to and provide a substantial margin above all Category 5e requirements of ANSI/TIA-568.2-D and IEC 61156-5.

Application
HCS DataLink 100e Horizontal cables support all presently available LAN applications, including the following protocols:
☑ 1000BASE-T Gigabit Ethernet
☑ ATM 155
☑ TP-PMD
☑ 100BASE-T "Fast Ethernet"
☑ 100BASE-T2
☑ 100BASE-T4
☑ 100BASE-TX
☑ Token Ring 100 Mbps
☑ ATM 52
☑ ATM 25
☑ 10BASE-T Ethernet
☑ Token Ring 4 Mbps and 16 Mbps
☑ Broadband ve Baseband Video
☑ ISDN Basic and Primary Access
☑ 1BASE-5 Starlan
☑ ISALAN
☑ ITU V.21 and X.11
Qualifications and Approvals
HCS DataLink 100e Cables are tested and verified for full compliance with the following standards:
☑ Category 5e according to ANSI/TIA-568.2-D
☑ Category 5e according to IEC 61156-5 (for ISO/IEC-11801 2nd Edition).
☑ 100 MHz according to CENELEC EN 50288-2
☑ Category 5 according to ICEA S-90-661-1997
Benefits & Features
→ Testing every box or reel of cable prior to shipment - providing the highest degree of quality assurance.
→ Exceptional material properties and cable design - providing a unique Century™ Lifetime Warranty.
→ High ACR values - providing low BER (Bit-Error-Rate) in all applications.
→ Extremely high pair-balance - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity.
→ Revolutionary pair lay scheme - providing an extremely low delay skew.
→ Co-extruded crisp and clear spiral color coding of wires - providing positive wire identification and ease of installation.
→ Descending sequential meter mark - providing easy stock and left-over handling.
→ LS0H inner jacket - providing safe use in indoor installations.
→ Heavy-duty, black, UV-resistant outer jacket - providing low-cost outdoor cables for mild environments.
→ Batch number printed every meter - providing fast retrieval of test results from data-base.
→ A comprehensive product range - providing all state-of-the-art cable constructions.
→ Large variety of packaging options - providing minimum scrap and left-over cable sections.
→ Unique DoubleSafe™ Quality Assurance Program providing lowest rejection rate available

PHYSICAL AND MECHANICAL PROPERTIES
4 color-coded, unshielded twisted pairs cabled together, overall taped-wrapped with a polyester tape and an aluminum foil and overall jacketed with LS0H compound (inner) and heavy-duty, black, UV-resistant PVC compound for outdoor use.
Basic Conductor : Solid, 24AWG, bare annealed copper
Insulation : Polyolefin
Number of insulated conductors : 8, twisted in 4 pairs. (8 pairs in FIG-8 cables)
Color Code of Pairs : Blue x White/Blue, Orange x White/Orange, Green x White/Green, Brown x White/Brown.         
Overall Tape Wrap : Plastic  tape, providing 100% coverage.
Drain wire: 24 AWG solid tin-coated copper conductor laid in close contact under the shield.
Overall shield: Laminated aluminum foil (foil face in) providing 100% coverage.
Inner Jacket: LS0H compound for indoor use.
Inner Jacket Color : Grey RAL 7035.
Outer Jacket : Heavy-duty, black, UV-resistant PVC compound for outdoor use.
Outer Jacket Color : Black RAL 9005.
Standard Surface Marking  : Includes HCS P/N, cable description, Meter mark and Batch Number.
Pulling force: 50 N/mm2 max.
Short Term Bend Radius : 8xOD mm
Long Term Bend Radius: 4xOD mm
Storage Temperature : -20 to +80C
Temperature operating range -20 to +60C
Installation temperature range: 0 to +50C
Flame Test  : IEC 60332-1
Conductor Size Test : UL 444.