| DataLink 100e | Category 5e F/UTP 100 Ohm LAN Patch Cables |
| Description |
| HCS DataLink 100e patch cable series consists of 100 Ohm impedance, 4-pair F/UTP cables for work-area, jumper and patch cord use in local area networks (LANs). All cables fully conform to and provide a substantial margin above all Category 5e requirements of ANSI/TIA-568.2-D and IEC 61156-6. |
| Application | |
| HCS DataLink 100e Patch cables support all presently available LAN applications, including the following protocols: | |
|
☑ 1000BASE-T Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2 ☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet ☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11 |
|
|
Qualifications and Approvals |
|
| HCS DataLink 100e Patch Cables are tested and verified for full compliance with the following standards: | |
|
☑ Category 5e according to
ANSI/TIA-568.2-D ☑ Category 5e according to IEC 61156-6 (for ISO/IEC-11801 2nd Edition). ☑ 100 MHz according to CENELEC EN 50288-2 ☑ Category 5 according to ICEA S-90-661-1997 |
|
Benefits & Features |
|
→
Testing every box or reel of cable prior to shipment - providing the
highest degree of quality assurance. → Exceptional material properties and cable design - providing a long lasting patch-cords. → High ACR values - providing low BER (Bit-Error-Rate) in all applications. → Extremely high pair-balance - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity. → Revolutionary pair lay scheme - providing an extremely low delay skew. → Co-extruded crisp and clear spiral color coding of wires - providing positive wire identification and ease of installation. → Descending sequential meter mark - providing easy stock and left-over handling. → Batch number printed every meter - providing fast retrieval of test results from data-base. → A comprehensive product range - providing all state-of-the-art cable constructions. → Large variety of packaging options - providing minimum scrap and left-over cable sections. → Unique DoubleSafe™ Quality Assurance Program providing lowest rejection rate available |
| PHYSICAL AND MECHANICAL PROPERTIES | ||
| 4 color-coded, unshielded twisted pairs cabled together, overall taped-wrapped with a polyester tape and an aluminum foil and overall jacketed. | |
| Basic Conductor : | Stranded, 26AWG, 7x0.16 mm, bare annealed copper |
| Insulation : | Polyolefin |
| Number of insulated conductors : | 8, twisted in 4 pairs. |
| Color Code of Pairs : | Blue x White/Blue, Orange x White/Orange, Green x White/Green, Brown x White/Brown. |
| Overall Tape Wrap : | Polyester tape, providing 100% coverage. |
| Overall shield : | Laminated aluminum foil (foil face inward) providing 100% coverage. |
| Drain wire : | 26 AWG stranded tin-coated copper conductor laid in close contact under the shield. |
| Outer Jacket : | LS0H Halogen free flame retardant or PVC compound. |
| Standard Jacket Color : | Light Gray RAL 7035. Other colors available upon request. |
| Standard Surface Marking : | Includes HCS P/N, cable description, Meter mark and Batch Number. |
| Pulling force : | 50 N/mm2 max. |
| Short Term Bend Radius : | 8xOD mm |
| Long Term Bend Radius : | 4xOD mm |
| Storage Temperature : | -20 to +80C |
| Temperature operating range : | -20 to +60C |
| Flame Test : | IEC 60332-1 |
| Conductor Size Test : | UL 444. |
| Halogen content in LS0H cables | Null. |