| DataLink 500A | Category 6A S/FTP 100 Ohm Outdoor LAN Cables |
| Description |
| HCS DataLink 500A outdoor cable series consists of 100 Ohm impedance, 4-pair S/FTP cables jacketed with heavy-duty, black,UV-resistant PE compound for horizontal outdoor installations in local area networks (LANs). All cables fully conform to and provide a substantial margin above all Category 6A requirements of ANSI/TIA-568.2-D and IEC 61156-5. All cables fully support all IEEE 802.3 PoE applications including Type 1, 2, 3 & 4, CISCO UPoE & UPoE+ and HDBase-T PoH. |
| Application | |
| HCS DataLink 500A Horizontal outdoor cables support all presently available and future LAN applications, including the following protocols: | |
|
☑ IEEE 802.3an 10GBASE-T 10
Gigabit Ethernet ☑ 1000BASE-T Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2 ☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet ☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11 |
|
|
Qualifications and Approvals |
|
| HCS DataLink 500A Cables are tested and verified for full compliance with the following standards: | |
|
☑ Category 6A ScTP according to ANSI/TIA-568.2-D ☑ Category 6A according to IEC 61156-5. |
|
Benefits & Features |
|
→
Exceptional transmission properties - suitable for 10GBE
applications on 100m channels. → Testing every reel of cable prior to shipment - providing the highest degree of quality assurance. → Exceptional material properties and cable design - providing a unique Century™ Lifetime Warranty. → High ACR values - providing low BER (Bit-Error-Rate) in all applications. → Extremely high pair-balance, individual and overall foil shields - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity. → Revolutionary pair lay scheme - providing an extremely low delay skew. → Heavy-duty, black, UV-resistant jacket - Providing low-cost outdoor cables for mild environments. → Batch number printed every meter - Providing fast retrieval of test results from data-base. → Unique DoubleSafe™ Quality Assurance Program - Providing lowest rejection rate available. |
| PHYSICAL AND MECHANICAL PROPERTIES | ||
| The cable contains 4 individually foil-shielded twisted pairs cabled together, overall shielded with a tinned-copper braid overall jacketed with black, UV resistant PE jacket for outdoor use in mild locations. | |
| Basic Conductor | Solid, 23AWG bare annealed copper |
| Insulation | SFS-PO |
| Number of insulated conductors | 8, twisted in 4 pairs. |
| Color Code of Pairs | Blue x White, Orange x White, Green x White, Brown x White. |
| Individual pair shield | Aluminum foil, providing 100% coverage, foil face out. |
| Overall shield | Tin-coated copper wire braid. |
| Outer Jacket | Heavy-duty, UV-resistant PE compound for outdoor use. |
| Standard Jacket Color | Black RAL 9005. |
| Standard Surface Marking | Includes HCS P/N, Cable Description, Meter Mark and Batch Number. |
| Pulling Force | 90 N/mm2 max. |
| Bend Radius | Dynamic: 8xD min. Static: 4xD min. |
| Storage Temperature | -20 to +60C |
| Temperature Operating Range | -30 to +60C |
| Conductor Size Test | UL 444 |