Description

HCS DataLink 600 outdoor CAT 7 cable series consists of 100 Ohm impedance, 4-pair and 8-pair S/FTP cables jacketed with heavy-duty, black, UV-resistant PVC compound for horizontal outdoor installations in local area networks (LANs) All cables fully conform to and provide a substantial margin above all Category 7 requirements of IEC 61156-5 (Specified in ISO/IEC 11801) and are tested up to 600MHz. These cables fully support all IEEE 802.3 PoE applications including Type 1 IEEE 802.3af 2008, Type 2 IEEE 802.3at 2009, Type 3 IEEE 802.3bt 2018 & Type 4 IEEE 802.3bt 2018, CISCO UPoE & UPoE+ and HDBase-T PoH.

Application
HCS DataLink 600 CAT 7 Horizontal outdoor cables support all presently available LAN applications, including the following protocols:
☑ Broadband Digital and Analog CATV signals up to 600 MHz ☑ SOHO and multiple simultaneous applications on all 4 pairs ☑ IEEE 802.3an 10GBASE-T 10 Gigabit Ethernet ☑ 1000BASE-T 1 Gigabit Ethernet ☑ ATM 155 ☑ TP-PMD ☑ 100BASE-T "Fast Ethernet" ☑ 100BASE-T2 ☑ 100BASE-T4 ☑ 100BASE-TX ☑ Token Ring 100 Mbps ☑ ATM 52 ☑ ATM 25 ☑ 10BASE-T Ethernet ☑ Token Ring 4 Mbps and 16 Mbps ☑ Broadband and Baseband Video ☑ ISDN Basic and Primary Access ☑ 1BASE-5 Starlan ☑ ISALAN ☑ ITU V.21 and X.11
Qualifications and Approvals
HCS DataLink 600 CAT 7 Cables are tested and verified for full compliance with the following standards:
☑ Category 7 according to IEC 61156-5 (for ISO/IEC-11801) ☑ 600 MHz according to CENELEC EN 50288-4

Benefits & Features

→ Exceptional transmission properties - suitable for 10GBE applications on 100m channels. → Testing every reel of cable prior to shipment - providing the highest degree of quality assurance. → Exceptional material properties and cable design - providing a unique Century™ Lifetime Warranty. → High ACR values - providing low BER (Bit-Error-Rate) in all applications. → Extremely high pair-balance and individual foil shields - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity. → Revolutionary pair lay scheme - providing an extremely low delay skew. → Co-extruded crisp and clear spiral color coding of wires - providing positive wire identification and ease of installation. → Descending sequential meter mark - providing easy stock and left-over handling. → Heavy-duty, black, UV-resistant jacket - providing low-cost outdoor cables for mild environments. → Batch number printed every meter - providing fast retrieval of test results from data-base. → Unique DoubleSafe™ Quality Assurance Program providing lowest rejection rate available.

	PHYSICAL AND MECHANICAL PROPERTIES

4 color-coded, individually foil shielded twisted pairs cabled together, overall shielded with a tin-coated copper braid and overall jacketed withheavy-duty, black, UV-resistant PVC compound for outdoor use.
Basic Conductor	Solid, 23AWG bare annealed copper
Insulation	Polyolefin
Number of insulated conductors	8, twisted in 4 pairs. (8 pairs in FIG-8 cables)
Color Code of Pairs	Blue x White, Orange x White, Green x White, Brown x White
Individual pair shield	Polyester-aluminum foil (foil face out), providing 100% coverage
Overall shield	Tin coated copper braid laid in close contact over the inner foils
Outer Jacket	Heavy-duty, black, UV-resistant PVC compound for outdoor use
Jacket Color	Black, RAL 9005.
Standard Surface Marking	Includes HCS P/N, cable description, Meter mark and Batch Number
Pulling force	50 N/mm2 max
Short Term Bend Radius	8xOD mm
Long Term Bend Radius	4xOD mm
Storage temperature	-20 to +60C
Operating temperature	-20 to +60C
Installation temperature	0 to +50C
Flame Test	IEC 60332-1.
Conductor Size Test :	UL 444.