 |
 
|
|
Category 5e U/UTP 100 Ohm Horizontal LAN Cables
|
|
|
| Description |
|
HCS DataLink 100e
cable series consists of 100 Ohm impedance, 4-pair and 8-pair U/UTP cables for horizontal
installations in local area networks (LANs).
All cables fully conform to and provide a
substantial margin above all Category 5e requirements of
ANSI/TIA-568-C.2 and IEC
61156-5.
|
| Applications |
|
HCS DataLink 100e Horizontal cables
support all presently available LAN applications, including the
following protocols:
|
- 1000BASE-T Gigabit
Ethernet
- ATM 155
- TP-PMD
- 100BASE-T "Fast
Ethernet"
- 100BASE-T2
- 100BASE-T4
- 100BASE-TX
- Token Ring 100 Mbps
- ATM 52
|
- ATM 25
- 10BASE-T Ethernet
- Token Ring 4 Mbps and 16
Mbps
- Broadband ve Baseband
Video
- ISDN Basic and Primary Access
- 1BASE-5 Starlan
- ISALAN
- ITU V.21 and X.11
|
| Qualifications and Approvals
|
|
HCS DataLink 100e Cables are tested and
verified for full compliance with the following standards:
- Category 5e according to ANSI/TIA-568-C.2
- Category 5e according to IEC 61156-5 (for ISO/IEC-11801 2nd
Edition).
- 100 MHz according to CENELEC EN
50288-3
- Category 5 according to ICEA S-90-661-1997
|
| Benefits & Features
|
- Testing every box or reel of cable
prior to shipment - providing the highest degree of quality
assurance.
- Exceptional material properties and
cable design - providing a unique Century™ Lifetime Warranty.
- High ACR values - providing low BER
(Bit-Error-Rate) in all applications.
- Extremely high pair-balance -
providing excellent EMC (Electro Magnetic Compatibility), minimizing
radiation and maximizing noise immunity.
- Revolutionary pair lay scheme -
providing an extremely low delay skew.
- Co-extruded crisp and clear spiral
color coding of wires - providing positive wire identification and
ease of installation.
- Descending sequential meter mark -
providing easy stock and left-over handling.
- Smooth and rigid jacket - proving fast
and easy cable pulling and installation.
- Batch number printed every meter -
providing fast retrieval of test results from data-base.
- A comprehensive product range -
providing all state-of-the-art cable constructions.
- Large variety of packaging options
- providing minimum scrap and left-over cable sections.
- Unique DoubleSafe™ Quality
Assurance Program providing lowest rejection rate available.
|
| Physical and Mechanical Properties
|
4
color-coded, unshielded twisted pairs cabled together and
overall jacketed.
Siamese (Figure-8) cables are made of two identical 4-pair
cables connected in a zip-cord formation, one cable identified
with a longitudinal a longitudinal
rib. |
| Basic
Conductor : |
Solid,
24AWG, 0.5 mm, bare annealed copper |
| Insulation
: |
Polyolefin
|
| Number
of insulated conductors : |
8,
twisted in 4 pairs. (8 pairs in FIG-8 cables) |
| Color
Code of Pairs : |
Blue
x White/Blue, Orange x White/Orange, Green x White/Green,
Brown x
White/Brown. |
| Overall
Tape Wrap : |
None. |
| Overall
shield : |
None. |
| Drain
wire : |
None. |
| Outer
Jacket : |
LS0H
Halogen free flame retardant or PVC compound. |
| Standard
Jacket Color : |
Light
Gray RAL 7035. Other colors available upon request. |
| Standard
Surface Marking
: |
Includes
HCS P/N, cable description, Meter mark and Batch Number. |
|
Pulling force: |
50
N/mm2 max. |
| Short
Term Bend Radius
: |
8xOD
mm |
| Long
Term Bend Radius: |
4xOD
mm |
| Storage Temperature
: |
-20
to +80C |
| Temperature operating range
|
-20
to +60C |
| Installation
temperature range: |
0
to +50C |
| Flame
Test
: |
IEC 60332-1 |
| Halogen
content in LS0H cables |
Null. |
|
|
|
